Knife Cabinet Hinges

knife cabinet hinges

Learn About Refinishing Kitchen Cabinets

Refinishing kitchen cabinetry can be accomplished for under $350 and a weekend project. You can refinish your dreary, existing kitchen cabinets into a shiny contemporary look. Bearing in mind that new replacement cabinets easily could cost over of $12,000 or more, refinishing your own cabinets is an idea definately worth looking into.

A cost efficient option for replacing old kitchen cabinets, stripping and refinishing them will certainly be a less costly alternative for the home projecteer on a small budget. With most of the various designs and looks of kitchen cabinets in existence, most kitchen cabinets basically look the same. Many cabinet fronts have flat panel doors.

Other styles possibly will boast certain variations of a flat panel. What changes is the timber used and the stain colors. Even if you have flat maple cabinetry similar to ones from the 60's, you can modernize your cabinets to a lustrous, flat panel cabinet to look like modern day European cabinets with a cherry stain color and modern pulls.

Here are the steps to successfully refinish kitchen cabinets :

1.) Begin by removing all of the doors. Once the cabinet doors have been removed, carefully take off the hinges and door pulls. You will not have to take down the cabinet boxes from the walls. Before starting the refinishing project, set up saw horses in your garage or work area where you can work without any disturbances. You will want to keep dust from falling on the cabinet doors during the staining project.

2.) Removing the old paint or stain. Resources you require for this stage of the job are:

  • paint and varnish stripper
  • mineral spirits
  • putty knife or flat scrapper
  • a toothbrush
  • rags
  • safety glasses
  • rubber gloves
  • old newspapers
  • painters tape
  • a disposable brush

When using paint stripper, be sure to protect yourself and the kitchen throughout the project. Definitely wear safety glasses to keep stripper from splashing your eyes. Wear rubber gloves to stop skin contact with the paint remover, and shield the kitchen areas with old newspapers.

Make sure that you have benefitial air movement... This is a necessity. Be sure to open the doors and windows for good air movement. While working in the kitchen, open the windows and doors. Put a fan in one of the windows to push the air outdoors when working.

3.) Mask off sections of the walls where they touch the sides of the cabinetry.

4.) Begin working on one door or cabinet at a time. Wearing gloves, place the paint remover onto the door. As soon as the remover has bubbled, use the flat of the putty knife to easily scrape the paint off. Cabinetry having only one application of paint or varnish should strip without difficulty. Cabinetry with many layers of paint will need a few applications of remover.

5.) Keep scraping the paint with the scaper, being certain to wipe the paint stripper on a rag or piece of newspaper. A  toothbrush should help in getting the grooves and corners clean.

6.) Next, after the paint or varnish is gone, wipe the wood down with mineral spirits. Make sure to remove all of the stripper and paint off every area.

7.) Begin preparing the wood before applying stain. You will need a handful of rags and several sandpaper sheets with varying grits. Sanding is performed to remove small areas of paint or varnish and to mend any areas that were harmed. Use the lower numbered grit sandpaper first, usually 80 or 120 to get rid of any paint left. Next, a light sanding with fine sandpaper, usually 220, is the last step to ready the surface. After sanding the cabinets, they should be wiped down with a slightly damp rag then left to dry.

8.) Applying the stain to the cabinet doors is the subsequent step. You'll need a brush specifically for stain, stain, gloves, steel wool(0000), mineral spirits, several rags, and a clear sealer. , It is important to always read the manufacturers application guidelines. The  next step is to apply several extra coats, lightly rubbing the stain with steel wool before applying a sealer.

9.) once the doors and cabinets have been suitably stained and have dried completely, they are ready to be put back together. At this time you may want to exchange out the pulls on the kitchenbearing in mindyo finish off the new appearance.

10.) Clean up the work area and make any necessary adjustments to your cabinets.

Your friends will be so impressed!

123 - A Butt Hinge Mortise


Wusthof 8001 Under-Cabinet-Swinger Knife Storage Block


Wusthof 8001 Under-Cabinet-Swinger Knife Storage Block


$31.00


This under-the-counter Oak Knife Block holds 9 of your most often-used knives, and mounts easily under your kitchen cabinet with 3 screws. When you aren't in need of a knife, simply swivel the block sideways so the knive's handles are out of your way. The block accommodates 1 chef's knife, 1 sharpening steel and 7 knives of your choice. 10-in. x 7-in. x 2.25-in.....

Under Cabinet Cookbook Holder


Under Cabinet Cookbook Holder


$74.95


This Cookbook Holder folds up under cabinet when not in use saving counter space. The hinged front allows easy page turning and protects from kitchen splatter. US made with native maple base and decorative metal hinges. Folds flat for storage....

KV Undercabinet Pull Down Cookbook Rack


KV Undercabinet Pull Down Cookbook Rack


$88.84


The KV pull down cookbook rack keeps recipes where you really need them, right above the countertop in your kitchen work space. Easily retro fit to underside of any upper cabinet with a 24" or wider space. Constructed with a 1/4" clear plastic shelf and nickel plated hinges....

JR Products 70695 Cabinet Knife Hinge


JR Products 70695 Cabinet Knife Hinge


$2.30


JR Products Cabinet Knife Hinge. Get your RV ready for the road with essentials like this Cabinet Knife Hinge. It's a concealed Hinge providing a spring-assisted closure system that helps hold the cabinet door shut. Universal fit for install on any cabinet door. Order Today! JR Products Cabinet Knife Hinge...

Amerock BP2606-BB Marathon Knife Hinge Size Number 6 Self Closing Overlay Burnished Brass, 1/2-Inch


Amerock BP2606-BB Marathon Knife Hinge Size Number 6 Self Closing Overlay Burnished Brass, 1/2-Inch


$2.04


Self-closing 1/2" Overlay...

Reversible Knife Hinges - Length 2-5/8'' (pair)


Reversible Knife Hinges - Length 2-5/8'' (pair)


$7.19


Only the pivot points show. Door must be inset to the top and bottom of the cabinet, and can be overlay or inset to cabinet side. Hinges attach to top and bottom ends of door and to the inside of the cabinet. Can be used for full inset or side overlay inset doors. Steel with a statuary bronze finish. Price per pair....

Youngdale #4 3/8 Inset Self Closing Knife Hinge For 3/4 Minimum Thickness Door Antique Brass Finish


Youngdale #4 3/8 Inset Self Closing Knife Hinge For 3/4 Minimum Thickness Door Antique Brass Finish


$2.99


The Youngdale hinge is considered among the best concealed hinges made in America today - and has been featured in award-winning kitchens and top quality cabinet productions from several leading manufacturers. 9/32" saw cut with a 6 -1/2" dado...

Leave a comment

Your comment